

School and University Floor Coatings in Utah
Cafeterias, locker rooms, shop classes and hallways each wear differently. Coatings matched to each space, installed while students are away.
Rating
4.9 on Google
From 198+ Google reviews
Experience
10+ years
In Utah since 2016
Coverage
Licensed & insured
Installers
Same crew
Installed by the same crew that's been with Elevated since day one
What a school floor has to handle
A campus has some of the most varied floors of any building type.
Cafeterias and kitchens see food spills and daily mopping, locker rooms stay wet, shop and art rooms take paint, oil and dropped tools, and science labs handle occasional chemical spills.
Hallways and entries take heavy foot traffic in short bursts, along with snow, salt and grit tracked in through Utah winters. Many older buildings also have worn VCT or tile that needs regular stripping and waxing.
- Food and drink spills in cafeterias
- Water and cleaning chemicals in locker rooms
- Paint, oil and tools in shop and art rooms
- Snow, salt and grit at entries
What we recommend and why
Flake systems suit locker rooms, restrooms and cafeterias because the texture helps underfoot and the pattern hides wear between cleanings. Solid epoxy is a practical choice for shop classes, art rooms, storage and mechanical rooms where durability and easy cleanup matter most.
In hallways and commons, polished concrete removes the strip-and-wax cycle that VCT needs. Kitchens that use hot water and steam cleaning are a better fit for urethane cement.
- Flake for locker rooms, restrooms and cafeterias
- Solid epoxy for shops, art rooms and storage
- Polished concrete for hallways and commons
- Urethane cement for kitchens with hot washdown

How the install works around the school calendar
Most school floor work happens over summer break, with smaller areas done over winter or spring break. Those windows fill early and other trades are often working in the building at the same time, so the floor work is sequenced with them.
Most bids include a site visit (some are bid from plans or an RFQ), and every bid comes in writing with the scope. For buildings used during breaks, work can be phased by wing or floor.

Prep and concrete testing
Older school buildings often have VCT, sheet goods or tile over the slab, and the adhesive underneath has to come up completely.
Some older flooring materials and adhesives need to be checked by the district before removal, which is worth sorting out early in planning.
Once the slab is exposed it is ground, cracks and joints are repaired, and moisture is tested. Slabs that held tile for decades sometimes carry more moisture than expected, and a vapor barrier layer can be added under the coating when testing calls for it.
Safety and cleaning
Slip resistance matters most in locker rooms, cafeterias and entries, and texture can be adjusted area by area.
Seamless floors also have no grout lines for spills and bacteria to settle into, which makes custodial cleaning more effective.
Because work typically happens while the building is empty, curing odors are less of a concern, but ventilation is still planned for any staff working nearby.
- Texture in wet and food-service areas
- Walk-off mats at entries in winter
- Neutral cleaners with auto-scrubbers in large areas
Maintenance and lifespan
Coated and polished floors skip the yearly strip-and-wax cycle, which frees up custodial time over breaks.
Routine care is sweeping and scrubbing with a neutral cleaner.
Entries and cafeteria lines wear first.
A fresh topcoat on a coated floor, or a re-polish on polished concrete, can be scheduled during a later break before wear reaches the base layers.
Process
How a bid works
Request
Send the building type, size and timing, and any plans or photos.
Site visit
For most bids, we look at the slab and agree the work window; moisture is tested when the slab needs it and listed in the bid. Some are bid from plans or an RFQ.
Written bid
Every bid comes in writing with the scope: the system, the prep and the areas covered.
Install
Planned around your hours. Before you reopen, we go over the cure schedule: when you can walk, load and drive on it.

Who installs your floor
Installed by the same crew that's been with Elevated since day one
Every bid comes in writing with the scope: the system, the prep and the areas covered.
Most bids start with a look at the slab; some are bid from plans or an RFQ.
Every bid comes in writing with the scope.
Planned around your hours.
Keep reading
Systems, problems and guides for this work
- IndustriesGyms & fitnessTextured locker rooms, cleanable lobbies and hallways, installed around member hours.Read more →
- IndustriesRestaurants & kitchensSeamless, slip-resistant kitchen floors installed overnight or on your closed day.Read more →
- ComparisonsCoating vs tile or VCTSeamless resin floors against quarry tile and VCT on grout, waxing, water and repairs.Read more →
- GuidesPhased installs and downtimeHow floors are coated in zones, at night or during shutdowns so the business stays open.Read more →
- SystemsPolished concreteA ground, densified and polished slab with no coating to peel.Read more →
- LocationsUtah CountyFloors for Utah County's offices, new builds, campuses, clinics and gyms, tested and scheduled around you.Read more →
Industries
Other industries we serve
- IndustriesRestaurants & kitchensSeamless, cleanable, slip-resistant floors for restaurants, quick-service kitchens and ice cream, soda and dessert shops — installed overnight or on your closed day.Read more →
- IndustriesBuild-outs & tenant improvementsMoving into a new space or remodeling one? Floors bid to your budget and scheduled around your build-out.Read more →
- IndustriesFranchise & multi-locationThe same floor in every store: we can install one spec across all your locations.Read more →
- IndustriesRetail, showrooms & officesPolished, metallic and flake floors for stores, showrooms, lobbies and offices, installed after hours.Read more →
- IndustriesAuto shops & dealershipsService bays that shrug off hot tires and fluids, and showroom floors that sell the cars on them.Read more →
- IndustriesAll industriesEvery type of facility we coat floors for, in one list.Read more →
FAQ
Schools & universities: questions
Straight answers to the questions we hear most.
Can the work be finished over summer break?
Most school floor projects are planned for summer for that reason. The earlier the site visit happens, the easier it is to fit the work into the window alongside other trades.
Is polished concrete a good replacement for VCT in hallways?
It often is. Polished concrete does not need stripping and waxing, and it holds up well to foot traffic, though it depends on the condition of the slab under the old tile.
What about the old floor tile and adhesive?
They have to be fully removed before coating. Districts often check older flooring materials before removal, so that step is worth planning early.
Which floors in a school benefit most from coatings?
Locker rooms, restrooms, cafeterias, kitchens, shop and art rooms usually see the biggest change because they are wet, messy or hard on bare concrete and tile.

Request a bid
Ready for a bid?
Send your project details or plans. We reply within 1 business day.