Skip to content
Polished concrete floor in a commercial lounge with sofas, rugs and a wall of windows

Polished concrete for businesses

Polishing grinds and densifies the slab itself into a smooth, reflective floor, so there is no coating to peel.

What polished concrete is

Polished concrete is the slab itself, ground with progressively finer diamond tooling until it is smooth and reflective. A chemical densifier hardens the surface along the way.

Because the finish is mechanical rather than a film on top, there is nothing to delaminate. The look depends on the slab's own color, aggregate and history.

Polished concrete floor in an open-plan office with high tables and a coffee bar

How it is installed

Grinding starts with coarse diamonds to remove sealers and flatten the surface, then steps through finer grits. A densifier is applied partway through to harden and tighten the surface.

Cracks and holes are filled before the final passes. A guard or stain-resistant treatment is often applied at the end to help resist spills.

  • Coarse grind to open the slab
  • Fill cracks and holes
  • Apply densifier
  • Progressive polishing to the chosen sheen
  • Protective guard
Polished concrete floor in an office corridor beside glass-front offices and an open work area

Key properties

Polished floors are hard, abrasion-resistant and dust-free, and they reflect light well. The aggregate exposure can range from a light cream finish to a fully exposed salt-and-pepper look.

The surface is still concrete, so it can absorb oils, acids and some spills if they sit, even with a guard applied.

Polished concrete floor along a window-lined corridor in a new office building with open ceiling ductwork

Where polished concrete is used

Polishing suits large, dry interior floors with foot traffic and light carts, where low upkeep and a clean modern look matter.

Polished concrete floor in an office break room with dark cabinets and a black base

Strengths, limits and when to choose something else

The strengths are longevity, low maintenance and no coating to fail. The limits are the slab: existing damage, patches and stains remain part of the look, and the surface is not ideal for standing oil or harsh chemicals.

Shops, kitchens and production floors that see fluids usually do better with a coating. Where only dust control is needed on a budget, a sealer may be enough.

Polished concrete floor in a window-lined office corridor leading to a workspace

Care and maintenance

  • Dust mop daily and auto-scrub with a cleaner made for polished concrete.

  • Acidic or harsh cleaners can etch the surface and dull the shine.

  • Periodic burnishing brings back gloss in traffic paths, and a light re-polish can restore an area that has dulled over time.

At a glance

PropertyWhat to expect
LookMatte to high sheen, slab's own color
DurabilityHard surface with no film to peel
SpillsCan stain from oils and acids left sitting
DowntimeModerate
Existing slabPatches and marks stay part of the look
UpkeepDust mop, scrub, burnish now and then

FAQ

Polished concrete: questions

Straight answers to the questions we hear most.

Polished concrete floor in an office training room with white tables and a black base

Can any slab be polished?

Most sound interior slabs can be, but results vary. Heavy patching, old adhesive and soft or damaged concrete affect the final look, which is why a site visit matters before choosing polish.

How does polished concrete do when it gets wet?

A clean, dry polished floor typically has good traction. Like most smooth floors it gets slicker when wet or dusty, so entry mats and prompt spill cleanup help.

Can polished concrete be colored?

Yes. Dyes or stains can be applied during the polishing process to add color while keeping the polished finish.

How does polished concrete compare with a coating for upkeep?

Polished floors usually need less recoating over their life, since there is no film to wear through. Coatings handle spills and chemicals better, so the right choice depends on what the floor sees.

Ready for a bid?

Send the details or plans for a written bid.

Request a Bid
Crew member back-rolling a grey coating across an aircraft hangar floor

Request a bid

Ready for a bid?

Send your project details or plans. We reply within 1 business day.