Skip to content
Polished concrete floor in a bright commercial entrance with an open wood staircase

Utah Commercial Floor Coatings

Built to work. Floor coatings for Utah businesses.

Free bids on floors for warehouses, shops, kitchens and facilities, planned around your schedule.

Commercial

Floors for forklifts, washdowns and deadlines.

You run the building; we work around it. Elevated Coatings installs floor systems for Utah business owners and facility managers — warehouses, plants, kitchens, shops and showrooms. We grind the slab, test moisture when it needs it and list that in the bid, and match the system to what happens on the floor. Every bid comes in writing with the scope.

Commercial floors we've coated include a private school done in two phases, a fire station, a retail plaza, a childcare center, a church and a fast-casual restaurant, plus a 17,000 sq ft floor delivered through a general contractor.

Who installs your floor

Installed by the same crew that's been with Elevated since day one

Every bid comes in writing with the scope: the system, the prep and the areas covered.

  1. Most bids start with a look at the slab; some are bid from plans or an RFQ.

  2. Every bid comes in writing with the scope.

  3. Planned around your hours.

Two concrete grinders on a freshly polished concrete floor in a building's mechanical room

Downtime

Downtime and return to service

These are the cure times we plan around; they vary with the system, temperature and traffic.

24 hours

Walking

48 hours

Light items

72 hours

Driving and vehicles

  • Nights and weekends: we work inside your window.

  • Phased by zone, so part of the building stays in use.

  • After-hours work is priced accordingly.

From first consultation to a written scope.

Every bid comes in writing with the scope, and most bids include a site visit.

Request a Bid
  1. Step 01

    Send us your request

    Send the building type, size and timing of the job, plus any plans or photos you have of the space.

  2. Step 02

    Site visit

    For most bids, we look at the slab and agree the work window; moisture is tested when the slab needs it and listed in the bid. Some are bid from plans or an RFQ.

  3. Step 03

    Written bid

    Every bid comes in writing with the scope: the system, the prep and the areas covered.

  4. Step 04

    Install in your window

    Planned around your hours.

  5. Step 05

    Before you reopen

    Before you reopen, we go over the cure schedule: when you can walk, load and drive on it.

On the job

On the job

Warehouses, plants, commercial kitchens, service bays and showrooms across Utah — ground, tested and coated around your schedule.

Polished concrete floor running the length of a timber-roofed event hall, reflecting the arched windows
Polished concrete corridor floor beside glass offices and workstations in a civic office building
Polished concrete hallway floor in a corporate office, leading to a lounge area
Polished concrete floor in an open office workspace with desks along a window wall
Polished concrete floor in a staff kitchen and training room, with a red kitchen island

Before & after

From worn slab to working floor

Grind, repair and coat, with moisture tested when the slab needs it and listed in the bid.

After: the same dining room corner with a grey flake epoxy floor and cove base, booths back in place
Before: restaurant dining room slab after the tile came up, covered in old adhesive ridges and stains
Before
After

FAQ

Commercial floor questions

Straight answers to the questions we hear most.

Blue metallic epoxy floor in an office reception area with leather sofas

Can you install while we stay open?

Usually, yes. We work nights, weekends and in sections (after-hours work is priced accordingly), following our return-to-service schedule.

How long until we can use the floor?

See the downtime schedule on this page; the exact times depend on your system, temperature and traffic.

Do you test the concrete first?

Yes, when the slab needs it, and the testing is listed in the bid. Slab moisture is a leading cause of coating failure; if it is high, we quote a mitigation primer instead of gambling with your floor.

Are your floors slip-resistant?

We build texture into the system to suit each area. We don't promise a slip-resistance number unless the manufacturer's data backs that exact system.

Can you provide a certificate of insurance?

Yes. We're licensed and insured, and we send a current certificate of insurance on request.

What areas do you serve?

All of Utah, from our shop in West Valley City, and Idaho for larger projects.

Still have a question?

Ask us directly — or send the plans and we will quote it.

Request a Bid
Two crew members spreading a dark coating on the floor of a building's mechanical room

Request a bid

Ready for a bid?

Send your project details or plans. We reply within 1 business day.