

Franchise & Multi-Location Flooring in Utah
The same floor in every store: we can install one spec across all your locations.
Rating
4.9 on Google
From 198+ Google reviews
Experience
10+ years
In Utah since 2016
Coverage
Licensed & insured
Installers
Same crew
Installed by the same crew that's been with Elevated since day one
What a multi-location floor has to handle
Franchise floors carry heavy customer traffic and constant cleaning, and they have to match a brand look from one store to the next. Entrances, service counters and drive-through areas wear faster than the rest of the store.
Each building brings its own slab, from older concrete to new construction and converted spaces. Different installers, products and methods at each site leave floors that look and wear differently over time.
- High customer traffic and daily mopping
- Brand standards for color, texture and finish
- Different slab conditions at every address
- Closures that cost sales at each store

What we recommend and why
Epoxy or polyaspartic flake is easy to repeat across locations, and its pattern hides wear and soil in busy stores. Polished concrete suits retail floors that need low maintenance and can be matched closely from site to site.
Franchise kitchens and food prep areas that see hot water and frequent washdown are better served by urethane cement. The written spec can name the right system for each type of room, so customer areas match while kitchens get what they need.
Flake floor coatings →Polished concrete →Urethane cement floors →

How installs work around trading hours
Multi-location work is usually scheduled store by store or region by region, often overnight or on slow days, so only one location is affected at a time.
New openings follow the build-out schedule, while remodels and refreshes fit around trading.
Splitting a store into zones and choosing faster-curing systems shortens the time any area stays closed. Cure time still depends on the system, the building temperature and how soon customers and equipment return.
Prep and concrete testing at each site
Every slab is ground to a consistent profile so the finish bonds and looks the same, even when the buildings differ in age.
Old coverings come off and cracks and joints are repaired before coating.
Moisture is tested at each location, because one wet slab can cause a failure the other stores never see. The spec records the prep method along with the system, color and texture.
Safety, brand standards and cleaning
Customer-facing floors need texture suited to each area, with more grip at entrances and near drink or food stations where spills happen.
A brand's floor standard can be bid as written, with anything that needs the franchisor's sign-off flagged in advance.
Giving every location the same cleaning routine and approved, pH-neutral cleaners keeps the finish consistent. Stores that use different cleaners often end up looking different even with the same floor.
Maintenance and lifespan across stores
Program floors last longest when every store follows the same care routine and worn spots are caught on regular visits.
Traffic, cleaning and how early repairs are made decide how long each store goes before a refresh.
Keeping the spec on file means repairs and recoats use the same materials and color.
- One written cleaning routine for every location
- Walk-off mats at entrances to trap grit
- Check entrances, counters and drive-through areas on regular visits
- Use the recorded spec for repairs and new stores
Process
How a bid works
Request
Send the building type, size and timing, and any plans or photos.
Site visit
For most bids, we look at the slab and agree the work window; moisture is tested when the slab needs it and listed in the bid. Some are bid from plans or an RFQ.
Written bid
Every bid comes in writing with the scope: the system, the prep and the areas covered.
Install
Planned around your hours. Before you reopen, we go over the cure schedule: when you can walk, load and drive on it.

Who installs your floor
Installed by the same crew that's been with Elevated since day one
Every bid comes in writing with the scope: the system, the prep and the areas covered.
Most bids start with a look at the slab; some are bid from plans or an RFQ.
Every bid comes in writing with the scope.
Planned around your hours.
Keep reading
Systems, problems and guides for this work
- GuidesPhased installs and downtimeHow floors are coated in zones, at night or during shutdowns so the business stays open.Read more →
- ComparisonsPolyaspartic vs epoxyFast-curing polyaspartic and build-friendly epoxy compared on downtime, UV and wear.Read more →
- IndustriesRestaurants & kitchensSeamless, slip-resistant kitchen floors installed overnight or on your closed day.Read more →
- IndustriesRetail, showrooms & officesPolished, metallic and flake floors for stores, showrooms and offices, installed after hours.Read more →
- CommercialRequest a bidSend the building, size and timing for a written bid.Read more →
- BlogHow Decorative Concrete Coatings Boost StorefrontsHow decorative concrete coatings help a storefront: clean, durable entries and sales floors that look sharp, plus which finishes suit retail spaces.Read more →
- BlogMinimizing Downtime During Commercial Floor CoatingsKeep a business running during a floor coating: fast-curing systems, phased zones, night and weekend installs and planning that shortens downtime.Read more →
- Blog5 Common Floor Coating Mistakes Businesses MakeThe five floor coating mistakes businesses make most, from skipping moisture tests to the wrong system, and how each one leads to early failure.Read more →
- BlogCommercial Floors: Coatings vs Polished ConcreteEpoxy coatings and polished concrete compared on durability, spills, upkeep and looks, with honest trade-offs to help you choose the right floor.Read more →
Industries
Other industries we serve
- IndustriesRestaurants & kitchensSeamless, cleanable, slip-resistant floors for restaurants, quick-service kitchens and ice cream, soda and dessert shops — installed overnight or on your closed day.Read more →
- IndustriesBuild-outs & tenant improvementsMoving into a new space or remodeling one? Floors bid to your budget and scheduled around your build-out.Read more →
- IndustriesRetail, showrooms & officesPolished, metallic and flake floors for stores, showrooms, lobbies and offices, installed after hours.Read more →
- IndustriesAuto shops & dealershipsService bays that shrug off hot tires and fluids, and showroom floors that sell the cars on them.Read more →
- IndustriesFood & beverage processingSeamless floors for washdown, steam and thermal shock in food plants and breweries.Read more →
- IndustriesAll industriesEvery type of facility we coat floors for, in one list.Read more →
FAQ
Franchise & multi-location: questions
Straight answers to the questions we hear most.
Can you match the floor at our other stores?
Usually. Send photos and the spec, or we can visit a store. Pick your color from real samples.
Can you schedule several locations at once?
Yes. We can plan the order with you, store by store.
Can you work overnight so the store stays open?
Often, yes, depending on the system; each store's scope shows its schedule.
Is the price the same for every location?
We can bid each store on its own slab and size, to the same spec; prep can differ from store to store.
What should we send before a multi-location bid?
A list of addresses, the brand's floor standard if there is one, rough sizes and photos of the current floors help most. A site visit then confirms each slab before the spec and schedule are written.
Can older stores be brought up to match a new one?
Usually, yes. An older store is ground and prepared for its own slab condition, then coated to the same spec, so it can match a newer location closely.
How is downtime kept the same at each store?
Using the same system, zones and install order at every location makes the closure time predictable. Differences in slab condition can still change the prep at a particular site.

Request a bid
Ready for a bid?
Send your project details or plans. We reply within 1 business day.