On this page
What actually makes a floor slippery
Most slips happen when something gets between a shoe and the floor: water, grease, oil, dust, or snowmelt tracked in from outside. A smooth surface that feels fine when dry can lose most of its grip once a thin film covers it.
That is why traction is planned around what each area actually sees. A dry office corridor and a dish room need very different surfaces, even in the same building.

How texture is built into a coating
Coating systems gain grip by adding texture to the surface. Common methods are broadcasting quartz or flake into a wet coat, or mixing a fine grit into the topcoat so it sits in the final layer.
Broadcast systems give a rougher, more even texture that suits wet and greasy areas. Grit in the topcoat gives a lighter texture that is easier on bare feet and simpler to mop.
Quartz floor coatings →Flake floor coatings →Urethane cement →
Matching texture to each area
Most buildings use more than one level of texture. The roughest surfaces go where liquids are constant, and smoother finishes go where the floor stays dry and needs to look clean and bright.
- 1Kitchens, dish rooms and washdown areas: heavier texture
- 2Entrances and loading docks: added grip for snowmelt and rain
- 3Service bays: texture that still lets oil be wiped up
- 4Locker rooms and showers: a finer texture comfortable underfoot
- 5Offices, showrooms and dry storage: little or no added texture
Try it before the whole floor is coated
The most reliable way to choose a texture is a sample panel made with the same system. Staff can walk on it wet and dry and try the cleaning routine before the decision is final.
Be cautious of slip-resistance promises that are not backed by the manufacturer's data for that exact system. Test results depend on the product, the texture and how the floor is maintained.
Habits that keep any floor safer
The floor is one part of slip prevention. Entrance mats, good drainage, quick spill cleanup and suitable work shoes all reduce the film that causes slips.
Texture also wears down over time in the busiest paths. Checking high-traffic areas and refreshing the topcoat when the texture fades keeps the floor performing as it did on day one.


