

Fleet and municipal garage floor coatings in Utah
Fleet shops and public works garages keep plows, trucks and service vehicles running through Utah winters. Their floors take road salt, fluids and heavy equipment that wear out bare concrete fast.
Rating
4.9 on Google
From 198+ Google reviews
Experience
10+ years
In Utah since 2016
Coverage
Licensed & insured
Installers
Same crew
Installed by the same crew that's been with Elevated since day one
What a fleet garage floor has to handle
Snowplows and service trucks come in caked with road salt and de-icing brine, which melts onto the floor and attacks bare concrete through the winter. Oil, coolant, hydraulic fluid and diesel drip in every bay, and heavy jacks, stands and tire changes concentrate weight in small spots.
Many shops also wash vehicles indoors or have trench drains running down the bays, so the floor is wet for long stretches. Bare concrete in these buildings often shows scaling, pitting and stains within a few winters.
- Road salt and de-icing brine from plows and trucks
- Oil, coolant, hydraulic fluid and fuel
- Heavy vehicles, jacks and stands
- Indoor washing and trench drains
- Dropped tools and parts

What we recommend and why
A solid epoxy base with a chemical-resistant topcoat is a common choice for service bays, giving a bright surface that shows leaks and cleans up easily.
A flake broadcast adds texture for footing on wet floors and hides wear from tools and tires.
Polyaspartic topcoats are often used where a quicker return to service matters and for their resistance to yellowing in bays with large doors and daylight. Wash bays with hot water or steam may call for urethane cement.
Solid epoxy floor coatings →Flake floor coatings →Polyaspartic coatings →
How the install works around your fleet
Fleet shops cannot stop servicing vehicles, so work is usually done a few bays at a time while the rest of the shop keeps running.
Winter is the busiest season for plow fleets, so many projects are scheduled for warmer months when bays can be freed up more easily.
Public agencies often have their own procurement steps, such as formal bid packages or required documents. A site visit and a written bid with the scope give the information most bid processes ask for.
How a commercial floor project works →How commercial floor coating bids work →
Prep and concrete testing
Years of oil and salt soak deep into shop concrete, so prep often includes cleaning oil-soaked areas and aggressive grinding to reach clean concrete.
Salt-scaled and pitted areas are repaired, and trench drain edges are rebuilt where they have broken down.
Older slabs may hold moisture or salt contamination that affects bonding, so testing comes before the system is chosen. Cracks and joints are addressed so they do not reflect through the new floor.
Safety and cleaning
Wet, oily floors are a constant slip risk for technicians, so texture is usually built into the topcoat across the bays.
A light-colored floor also reflects shop lighting, which helps technicians see dropped parts and spot leaks.
Squeegee salty meltwater toward drains during storms rather than letting it sit, and clean up fluid spills promptly. Wash with cleaners that are compatible with the coating rather than harsh solvents.
- Squeegee meltwater and brine to drains
- Use absorbent on fluid spills right away
- Place plywood or pads under jack stands
- Rinse salt residue off the floor after storms
Maintenance and lifespan
A coated shop floor lasts longest when salt and grit are not left to grind under tires all winter.
Regular scrubbing and periodic checks around drains, doors and lift points catch wear while it is still a small repair.
Lifespan depends on the vehicles, the chemicals and how the floor is cleaned.
Topcoats in the heaviest lanes can be renewed over time without redoing the whole system.
Process
How a bid works
Request
Send the building type, size and timing, and any plans or photos.
Site visit
For most bids, we look at the slab and agree the work window; moisture is tested when the slab needs it and listed in the bid. Some are bid from plans or an RFQ.
Written bid
Every bid comes in writing with the scope: the system, the prep and the areas covered.
Install
Planned around your hours. Before you reopen, we go over the cure schedule: when you can walk, load and drive on it.

Who installs your floor
Installed by the same crew that's been with Elevated since day one
Every bid comes in writing with the scope: the system, the prep and the areas covered.
Most bids start with a look at the slab; some are bid from plans or an RFQ.
Every bid comes in writing with the scope.
Planned around your hours.
Keep reading
Systems, problems and guides for this work
- IndustriesAuto shops & dealershipsBay floors that resist hot tires and fluids, and showroom floors that look sharp.Read more →
- IndustriesFire stations & EMSApparatus bays, decon rooms and station floors; we can coat bay by bay so crews stay in service.Read more →
- IndustriesCar washesTextured, chemical-resistant floors for wash bays and tunnels that face water, salt and grit.Read more →
- Problems we fixChemical-damaged floorsEtched, softened or stained floors from spills and cleaners, and how resistant systems fix them.Read more →
- GuidesHow floor coating bids workThe steps from bid request to written scope, and how to compare floor coating bids fairly.Read more →
- CommercialRequest a bidSend the building, size and timing for a written bid.Read more →
- GuidesWarehouse safety stripingHow to plan warehouse aisles, walkways and hazard markings, and keep the lines visible under traffic.Read more →
Industries
Other industries we serve
- IndustriesRestaurants & kitchensSeamless, cleanable, slip-resistant floors for restaurants, quick-service kitchens and ice cream, soda and dessert shops — installed overnight or on your closed day.Read more →
- IndustriesBuild-outs & tenant improvementsMoving into a new space or remodeling one? Floors bid to your budget and scheduled around your build-out.Read more →
- IndustriesFranchise & multi-locationThe same floor in every store: we can install one spec across all your locations.Read more →
- IndustriesRetail, showrooms & officesPolished, metallic and flake floors for stores, showrooms, lobbies and offices, installed after hours.Read more →
- IndustriesAuto shops & dealershipsService bays that shrug off hot tires and fluids, and showroom floors that sell the cars on them.Read more →
- IndustriesAll industriesEvery type of facility we coat floors for, in one list.Read more →
FAQ
Fleet & Municipal Garages: questions
Straight answers to the questions we hear most.
How does road salt damage concrete shop floors?
Salt brine soaks into bare concrete and goes through repeated wet and dry and freeze-thaw cycles, which breaks down the surface and causes scaling and pitting. A coating keeps the brine on top where it can be cleaned off.
Can a coating handle heavy trucks and plows?
Coatings are installed in heavy vehicle bays regularly, but the system and its thickness are matched to the loads, tire traffic and equipment in the shop. Those details are reviewed during the site visit.
Can you work within a public bid process?
Every bid comes in writing with the scope, and most include a site visit; some are bid from plans or an RFQ. Agencies with specific bid forms or requirements should share them early so the proposal matches what the process needs.
Can we keep part of the shop open?
Yes. Most fleet projects are phased a few bays at a time so vehicles can still be serviced in the rest of the building.

Request a bid
Ready for a bid?
Send your project details or plans. We reply within 1 business day.