Skip to content
Glossy grey coated floor in a large open airport hangar, with the steel hangar doors, a side wall and ceiling lights

ESD and static-control epoxy floors

Static-control epoxy floors carry static charges safely to ground, protecting sensitive electronics and equipment.

What an ESD floor is

An electrostatic discharge, or ESD, floor is an epoxy system made conductive or static-dissipative with special additives.

When people or carts move across it, built-up static drains to ground instead of jumping to sensitive equipment.

The floor is one part of a static-control program that also includes footwear, grounding points and testing.

How it is installed

After surface prep and repair, copper grounding strips or tape are laid and connected to the building ground.

A conductive primer goes down, followed by the static-control body coat.

The finished floor is tested to confirm it performs within the range the facility specifies.

  • Surface prep and repair
  • Grounding strips connected to building ground
  • Conductive primer
  • Static-control epoxy coat
  • Electrical resistance testing

Key properties

Beyond static control, the floor has the durability and cleanability of epoxy.

Its electrical performance depends on correct grounding and on keeping the surface free of insulating films such as waxes.

The required resistance range depends on what is being protected, so it is set by the facility's own standards.

Where it is used

ESD floors are used where static can damage components or create hazards: electronics assembly, server rooms, labs and some healthcare equipment areas.

Strengths, limits and when to choose something else

A static-control floor gives continuous, seamless protection across a room.

It only works as part of a full program, and it is a premium system, priced above standard coatings.

Spaces that do not handle static-sensitive equipment rarely need it; solid epoxy usually covers durability and cleaning needs at a lower cost.

Care and maintenance

  • Clean with products approved for static-control floors; waxes and some finishes insulate the surface and block performance.

  • Keep grounding connections intact during any renovation.

  • Retest the floor on a regular schedule so the facility knows it still performs.

At a glance

PropertyWhat to expect
PurposeDrains static charges safely to ground
GroundingConnected to the building ground
TestingChecked against the facility's required range
LookSmooth, solid color
ProgramWorks with footwear and grounding points
UpkeepApproved cleaners only, retest regularly

FAQ

ESD epoxy: questions

Straight answers to the questions we hear most.

What is the difference between conductive and dissipative floors?

Both move static to ground, but at different speeds. The right type depends on what equipment is being protected and the facility's standards.

Do workers need special shoes?

Usually yes. The floor and footwear work together; ordinary rubber soles can insulate a person from the floor.

Can an existing epoxy floor be made static-control?

Sometimes, with proper prep and grounding before a static-control topcoat. It depends on the condition of the existing floor.

Ready for a bid?

Send the details or plans for a written bid.

Request a Bid
Two crew members spreading a dark coating on the floor of a building's mechanical room

Request a bid

Ready for a bid?

Send your project details or plans. We reply within 1 business day.