

Salon and spa floor coatings in Utah
In a salon the floor is part of the brand, and it also takes hair color, water and rolling chairs all day. A seamless coated floor can look polished and still wipe clean between clients.
Rating
4.9 on Google
From 198+ Google reviews
Experience
10+ years
In Utah since 2016
Coverage
Licensed & insured
Installers
Same crew
Installed by the same crew that's been with Elevated since day one
What a salon or spa floor has to handle
Hair color, bleach and developer drip onto the floor at every station, and they stain grout, porous concrete and some vinyl permanently. Cut hair has to be swept constantly, so the floor needs to be smooth enough for a broom to clear quickly.
Styling chairs pivot and roll in the same spots all day, and shampoo bowls, pedicure stations and treatment rooms add water to the mix. Spas also need a calm, finished look that matches the rest of the space.
- Hair dye, bleach and chemical drips
- Constant sweeping of cut hair
- Pivoting and rolling chairs at stations
- Water at shampoo bowls and pedicure stations
- A floor that fits the salon's design

What we recommend and why
Metallic epoxy is a popular choice in salons because it gives a distinctive, high-end look while sealing the surface against dye.
A flake system is a practical option for barbershops and back rooms, since the pattern hides small marks and the texture helps with footing near sinks.
Polished concrete suits spas and minimalist studios, though it should be well sealed and guarded because it is more prone to staining from dyes than a coating. The right choice depends on the look you want and how much color work happens on the floor.
How the install works around your appointments
Salons and spas book clients days or weeks ahead, so floor work is usually scheduled on closed days, over a weekend or during a planned remodel.
Stations, chairs and product displays are moved out before prep starts.
In a new suite or tenant build-out, the floor is often coated before stations and fixtures are installed, which gives the cleanest result. Cure time before chairs and foot traffic return depends on the system and the temperature.
Prep and concrete testing
Many salons are in strip centers where the old floor was carpet, tile or vinyl plank, so adhesive and patching compound have to be removed first.
The slab is then ground so the coating can bond, and plumbing trenches for shampoo bowls are patched level.
Moisture is tested when the slab needs it, especially where new plumbing was installed or the slab is older, and listed in the bid. Moisture coming up through concrete is a common reason decorative floors bubble or peel.
Safety and cleaning
Wet hair and water at shampoo bowls make salon floors slippery, so texture can be added around sinks and pedicure stations while the rest of the floor stays smooth for sweeping.
Mats at wash stations also help.
Wipe dye and bleach drips as they happen, and clean with a neutral cleaner. Strong solvents and some nail-care products can dull or soften a topcoat, so check what is used on the floor.
- Wipe dye and bleach drips right away
- Use a neutral cleaner for daily mopping
- Add texture near sinks and pedicure stations
- Keep acetone and nail products off the floor
Maintenance and lifespan
The most wear happens under styling chairs, where the base pivots in one spot.
Chair mats or protective pads under bases can extend the life of the finish, and casters should be kept in good shape.
When the topcoat starts to dull in high-traffic paths, a recoat after light prep can restore the look without starting over.
Lifespan depends on traffic, chemicals and how quickly drips are cleaned.
Process
How a bid works
Request
Send the building type, size and timing, and any plans or photos.
Site visit
For most bids, we look at the slab and agree the work window; moisture is tested when the slab needs it and listed in the bid. Some are bid from plans or an RFQ.
Written bid
Every bid comes in writing with the scope: the system, the prep and the areas covered.
Install
Planned around your hours. Before you reopen, we go over the cure schedule: when you can walk, load and drive on it.

Who installs your floor
Installed by the same crew that's been with Elevated since day one
Every bid comes in writing with the scope: the system, the prep and the areas covered.
Most bids start with a look at the slab; some are bid from plans or an RFQ.
Every bid comes in writing with the scope.
Planned around your hours.
Keep reading
Systems, problems and guides for this work
- IndustriesRetail, showrooms & officesPolished, metallic and flake floors for stores, showrooms and offices, installed after hours.Read more →
- IndustriesBuild-outs & tenant improvementsFloors bid to your budget and scheduled around your build-out.Read more →
- IndustriesGyms & fitnessTextured locker rooms, cleanable lobbies and hallways, installed around member hours.Read more →
- Problems we fixSlippery wet floorsFloors that turn slick with water, grease or snow, and how textured systems add traction.Read more →
- CommercialRequest a bidSend the building, size and timing for a written bid.Read more →
Industries
Other industries we serve
- IndustriesRestaurants & kitchensSeamless, cleanable, slip-resistant floors for restaurants, quick-service kitchens and ice cream, soda and dessert shops — installed overnight or on your closed day.Read more →
- IndustriesBuild-outs & tenant improvementsMoving into a new space or remodeling one? Floors bid to your budget and scheduled around your build-out.Read more →
- IndustriesFranchise & multi-locationThe same floor in every store: we can install one spec across all your locations.Read more →
- IndustriesRetail, showrooms & officesPolished, metallic and flake floors for stores, showrooms, lobbies and offices, installed after hours.Read more →
- IndustriesAuto shops & dealershipsService bays that shrug off hot tires and fluids, and showroom floors that sell the cars on them.Read more →
- IndustriesAll industriesEvery type of facility we coat floors for, in one list.Read more →
FAQ
Salons & Spas: questions
Straight answers to the questions we hear most.
Will hair dye stain an epoxy floor?
A sealed epoxy or polyaspartic topcoat resists dye much better than bare concrete, grout or many vinyl floors. Drips should still be wiped promptly, since some strong colors and bleach can mark any surface if left to sit.
Is a glossy floor too slippery for a salon?
A high gloss finish can be slick when wet. Texture can be added in wet zones, and a satin topcoat can be chosen if the whole floor should have more grip.
Can the floor match our brand colors?
Metallic epoxy, solid colors and flake blends come in a wide range of colors, and samples can be reviewed before the project starts so the floor fits the salon's design.
Can a salon in a leased space get a coated floor?
Yes, coated floors are common in leased retail suites. Most tenants confirm with the landlord first, since a coating is a permanent improvement to the slab.

Request a bid
Ready for a bid?
Send your project details or plans. We reply within 1 business day.